General Product Overview - Hospital / Cleanroom Diffusers

Radial Pattern Diffusers
This is Nailor’s standard Radial Pattern Diffuser. The diffusers have been designed to provide low aspiration at high ventilation rates especially for cleanroom applications.The unique design of solid baffles in an intrusive perforated face can supply large volumes of air at low initial face velocities. Available in either a 180°or 90° radial flow pattern.

• Models 92RPD-2, 92RPD-1 – Aluminum
• Models 92RPD-2SS, 92RPD-1SS – Stainless Steel

Radial Pattern Diffusers with Filters
This Radial Pattern Diffuser has a similar appearance to the standard model series 92RPD, however, it incorporates an extended plenum and a unique frame designed to accommodate a Gel Seal HEPA or ULPA filter. These high quality filters incorporate a separatorless2"(51) deep media, integral test port and an anodized aluminum gel seal frame.

• Models 92RPDF-2SS, 92RPDF-1SS – Stainless Steel

Flush Face Radial Pattern Diffusers
This diffuser provides an air pattern very similar to the standard model but incorporates a unique 'Flush Face' appearance. Specially designed internal baffles and a pressure plate produce an excellent radial air pattern that allows large volumes of air to be supplied at low velocities. Available in either a 180° or 90° radial flow pattern.

• Models 92FRP-2AL, 92FRP-1AL – Aluminum
• Models 92FRP-2, 92FRP-1 – Steel
• Models 92FRP-2SS, 92FRP-1SS– Stainless Steel

Adjustable Radial Pattern Diffusers
The Radial Pattern Diffuser in this series allows for adjustment of the air pattern. Nailor offers two distinct performance styles. One style incorporates adjustable straight blades that run the length of the center while the other style contains a perforated center. Both types include adjustable curved blades for directional control and are available in either aluminum or steel construction.

• Models 92CBPRP-AL, 92CBPRP – Perforated Center
• Models 92CBSRP-AL, 92CBSRP – Straight Blade Center

Laminar Flow Diffusers
This is Nailor’s standard Laminar Flow Diffuser. This series utilizes the well proven and time tested concept of vertical air mass 'laminar flow' technology. They produce a non-aspirating low velocity, uniformly distributed downward moving 'piston' of conditioned air. They may be used individually or as in the case of hospital rooms, several units may be banked together to sufficiently cover the area and produce one combined laminar mass.
• Model 92LFD-AL – Aluminum
• Model 92LFD – Steel
• Model 92LFD-SS – Stainless Steel

Laminar Flow Diffusers with Filters
This series of Laminar Flow Diffusers with Filters are similar to the standard model, however, they incorporate an extended plenum and a unique frame designed to accommodate a Gel Seal HEP A or ULPA filter. The filters can be easily removed and replaced from the face of the unit. These high quality filters incorporate a separator less 2" (51) deep media, integral test port and an anodized aluminum gel seal frame.

• Model 92LFDF-AL – Aluminum
• Model 92LFDF-SS – Stainless Steel Model 92LFDF-SS

Seri-System Linear Slot Diffusers
The Nailor Seri-System Linear Slot Diffusers are specially designed to provide an air curtain for operating rooms. The unique slot design creates a continuous curtain of air, angled outwards 5 – 15°, that encloses the operating area and minimizes the possibility of contaminated air entering the surgical area. The single slot design creates a uniform low velocity curtain that minimizes entrainment of contaminated air into the curtain air stream. It also creates a wider velocity profile with less turbulence and hence less induction over similar two slot designs. The face design incorporates longitudinal deflectors that horizontally deflect a small amount of air lengthwise. This effectively joins the airflow through sections and corners with a truly continuous air curtain, resulting in enhanced isolation of the surgical area.
• Model 92LS-SS – Stainless Steel, Suffix '-O' adds a stainless steel OBD.